Troubles and handling methods of direct discharge vibration screen
1.The running of vibrating motor is not good.
1) confirm the power handling method: open the switch
2) bad contact caused by the lack of cable length handling method: replace the cable
3) the cable is broken handling method: replace the cable
4) the motor coil is burned handling method: replace the motor
5) feed too much lubricating oil handling method: continuous running
2.Abnormal sound
1) the clamp screw is not locked tightly handling method: lock the nut tightly
2) the clamp is not fitting safely handling method: lock the copper nut tightly
3) the base station is not stable handling method: stabilize the base station
4) the spring is broken handling method: replace the spring
5) the machine body is in contact with other hardware handling method: move out a space about 10cm
6) the alloy steel of motor is loose handling method: confirm it is locked tightly
7) the discharge port is in contact with other objects handling method: let it be far away from other objects
3.The raw material can’t be discharged automatically
1) the running direction of motor is wrong handling method: change the contacting sequence of power
2) the angle of upper and lower eccentric block is too large handling method: let the angle be less than 90°
3) the installation of upper and lower eccentric block is wrong handling method: install the heavy eccentric block on the upper side; light, lower
4.The fine mesh is easy to be damaged
1) the raw material impacts the mesh surface directly handling method: change to use buffer
2) the fine mesh isn’t tight handling method: replace it again
3) the rough mesh is broken handling method: replace it
4) the rubber pad is thin by grinding handling method: replace it
5.The stainless steel exit is broken
1) connect too heavy pipes or lift heavy objects handling method: insulate the exit
2) the clamp is locked unevenly handling method: lock the clamp tightly
+86-373-3669005
+86-373-3669006
From West Room 5, 1st Floor, Building 18, Huilong Yangguang Mingyuan, New District, Xinxiang, Henan, China (Mainland).
(Live chat)
_213x160.jpg)
laura@vibratingscreen.cc
Your Position: