Need help?

(Live chat)

or Emai us: laura@vibratingscreen.cc

Hot Product

Contacts

+86-373-3669005

laura@vibratingscreen.cc

+86-373-3669006

From West Room 5, 1st Floor, Building 18, Huilong Yangguang Mingyuan, New District, Xinxiang, Henan, China (Mainland).

Your Position:Home > Faq

The installation of silo wall vibrator

1. Full-steel silo:the ZFC type device should be welded on the outer wall of the silo.
2. The upper part is concrete silo, the underpart is steel hopper: the ZFC type device should be welded on the outer wall of the steel hopper.
3. Full-concrete silo and strengthened-steel hopper: the ZFC type device should be welded on the vibrating plate laid in the silo.
4. Silo of storing pure thick material: no mater what type the silo is, the ZFC type device should be welded on the vibrating plate laid in the silo.

5. Chute: the ZFC type device should be welded at the easily-stuck and easily-jammed parts of the chute.

6. Conical silo: if the diameter of installation part is more than 1m, please install two machines.

7. No matter what the installation way is, ensure the level height difference is 50-100mm as long as installing this device at both sides of the silo.

Pre:The summary of dewatering screen

Next:What should be paid attention to in the use of jaw crusher?