Matters need attention when installing screen surface on discharge sieve

        The screen surface would damage after a period using. So, the operator should inspect machine regularly before start machine. If the screen surface damaged, the operator should replace it on time and avoid unnecessary loss.
Before replacing screen surface, the operator should care following points:
1. The operator should shear the screen surface into a much longer than the diameter of frame 10-20mm. The operators should wear the gloves.


2. The screen surface should be tightened enough,the tension of screen surface directly have an impact on the sieving efficiency.


3. After installing, the operator should use some raw material to test the tension whether it is suitable. If the movement of material on the surface is normal and the material could discharge fluently, it is proved
Available. If the material deviate or heap up, the operator should adjust the level of screen surface.