Need help?

(Live chat)

or Emai us: laura@vibratingscreen.cc

Hot Product

Contacts

+86-373-3669005

laura@vibratingscreen.cc

+86-373-3669006

From West Room 5, 1st Floor, Building 18, Huilong Yangguang Mingyuan, New District, Xinxiang, Henan, China (Mainland).

Your Position:Home > Faq

How to solve the slow discharge of vibrating screen?

1. Check whether the screen surface and the discharge opening are at the same level or lower than the discharge opening. In general, the screen surface should be about 5mm lower than the discharge opening. According to the characteristics of different materials, Dayong will design different height of the outlet.

2. When vibrating screen or ultrasonic vibrating screen at work, check whether the screen surface and the outlet are in a horizontal state. This is directly related to the sieving effect of the equipment; if it is not horizontal, it should be adjusted in time, The vibrating screens made by Dayong are equipped with support feet, and the customer can adjust the height of the feet to make it horizontal.

3. In addition to the above, the key point is that the angle of the upper and lower eccentric blocks of the vibrating motor can be adjusted. The smaller the angle is, the faster the material will spread out, and the larger the angle is, the material will stay longer time at mesh surface. When changing the angle of the eccentric block of the vibration motor, each adjustment should be about 5 degrees. Non-professionals should not adjust the angle greatly. If you have strict requirements on the screening accuracy, the motor angle should not be too small, otherwise the material will be discharging quickly , which is unfavorable for the sieving effect. In general, the angle of the motor eccentric block is 45° when the vibrating screen is shipped.

Pre:Application of urea linear vibrating screen

Next:How to Choose Rapidly Model of Rotary Vibrating Screen