Need help?

(Live chat)

or Emai us: laura@vibratingscreen.cc

Hot Product

Contacts

+86-373-3669005

laura@vibratingscreen.cc

+86-373-3669006

From West Room 5, 1st Floor, Building 18, Huilong Yangguang Mingyuan, New District, Xinxiang, Henan, China (Mainland).

Your Position:Home > Faq

How To Choose The Vibration Motor Of The Vibration Table

Vibration table can generally meet many types of requirements with two-dimensional vibration, and are mostly used for concrete air defense doors, tons bags, etc. For the vibration motor, use a 4 pole vibration motor 1450rpm whose vibration amplitude is slightly larger than 3mm and the frequency is not too high.

If the vibration table is used for materials with relatively high vibration requirements, then the three-dimensional vibration method must be selected, which must ensure both up and down vibration and horizontal vibration, so as to fully vibrate and ensure density and quality. It is generally used for vibration vibration of complex cavity casting resin sand, casting lost foam, etc. Vibration motor should use the 2pole 2850rpm vibration motor with vibration amplitude less than 3mm, higher frequency and higher speed, generally 6 vibration motors are used.

Of course, if the table is larger than 4 square meters, if the table is more than 2mx2m, it is best to use the asynchronous motor with a vibration exciter, so it is not recommended to use a vibration motor. This can reduce the impact of the vibration motor on the large table, and prevent the table from cracking, deformation, unevenness and other failures.

If you have more needs, please contact us!

Pre:The Main Types of Vibrating Screen for Metal Powder

Next:Significant Advantages of Vacuum Feeder