Grain suction machine common failures and handling methods

 In the process of using the grain suction machine, sometimes because of incorrect operation or the existence of problems with the machine itself may be the case of failure, and encounter failure to check and solve the problem in a timely manner, the following these common failures and practices you can refer to.

1, material mouth blockage

This situation is very common, if the material mouth blocked as long as the front cover flip open to check whether there is a foreign body in the material box, if there is a direct treatment clear. If there are cloth, plastic cloth and other entanglements, these foreign objects clear clean. And clean out the grain in the feed tube, and then turn on the machine can work normally.

2、Loose v-belt

If such a situation occurs, to immediately stop the operation, the two sides of the plate turned over, adjust the motor adjustment bolts can be solved. If the v-belt has been seriously worn, then you need to replace the same type of v-belt. If there is oscillation when starting the machine at no load, it is normal, and it can be directly loaded.

In short, the grain suction machine working conditions have faults is also common, so there is no need to be overly nervous after the fault, you can follow the above method to eliminate the problem.