Factors Affecting the Cutting of Circular Swing Screen

1. The choice of screen. Different materials have different particle sizes. If you want to screen more efficiently, you must choose a suitable screen. If the screen size is too large, it will increase the output of the sieve and cause the screening accuracy to be insufficient; the screen size is too small It will increase the amount of material on the screen and the screening output cannot be reached. Therefore, when selecting the screen, it must be matched with the material produced.

2. Exciting force is too small. The driving force for the operation of the circular swing screen is the operation of the motor. The size and power of the vibration motor used in different specifications of the circular swing screen are also different. The circular swing screen uses a vibration motor to drive the belt, and then the belt drives the bearing to realize the conversion of electric energy. For mechanical energy. In the long-term use process, the vibrating motor and the belt will be worn to different degrees, which will affect the size of the exciting force and cause slow feeding of the swing screen. In response to this problem, the editor recommends regular inspection of the wear of the vibration motor and related parts, timely replacement and maintenance, so as to extend the service life of the motor and ensure the efficiency of screening.

3. Net cleaning device. The common cleaning devices of the circular swing screen are bouncing ball cleaning, ultrasonic cleaning and rotating brush cleaning. The cleaning device will be damaged during long-term operation, which can not achieve a good cleaning effect and affect the cutting speed. Therefore, the equipment should be inspected and maintained regularly when using the swing screen to ensure the normal operation of each component.